|
|
|
|
|
|
|
|
|
|
|
|
|
|
1-5/16"W spring-loaded latch assembly for hinged shower doors. 9/16"W x 3/4"L x 1/2"H stainless steel housing with nylon tip. Includes two No.8 x 3/8" Phillips pan head sheet metal screws.
|
1/4"W oval-edge nylon ball bearing wheel with 7/16" threaded hex hub. Includes truss head screw.
|
Nylon ball bearing roller with threaded hex hub. Contents: 2 rollers with #8-32x3/8 Phillips binder head machine screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ball bearing construction, nylon wheel with 8-32 threaded center hole and 7-16" hub diameter that extends from back 1/8".
|
1/4"W oval-edge nylon ball bearing wheel with 7/16" threaded hex hub. Includes truss head screw.
|
1/4"W flat-edge nylon ball bearing wheel with 3/8" threaded hex hub. Includes truss head screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5/32" wide x 3/4" tall for use on hinged shower doors.
|
Used by several shower door manufacturers for sliding tub-enclosure doors. 1"L x 1-9/16"W x 5/8"H overall. Fits 7/16" thick door rails.
|
"Star Tip" shaped; for use on hinged shower doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ball bearing construction, nylon wheel with 8-32 threaded center hole and 7-16" hub diameter that extends from back 1/8".
|
Injection molded plastic bottom guide fits 7/16" thick door panels. Installed with double sided tape included. Includes 1 guide.
|
T-shaped tip, fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use on hinged shower doors.
|
Sliding shower door bottom guide edge mounts onto base frame with screws. Fits 7/16" thick panels.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nylon bottom guide for sliding tub enclosure doors; fits 1/2" thick door rails; snap-in tabs hold guide to track. Fits On: International. Contents: 2 guides.
|
Bottom guide used to keep glass door panels separated. Snaps into place on base of enclosure., Clear vinyl material.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bottom guide for sliding shower enclosure doors.
|
Plated diecast handles; outside handle with threaded studs and inside handle with holes; supplied with stainless steel machine screws. Contents: 1 handle set with installation screws.
|
Plated diecast handles; outside handle with threaded studs and inside handle with holes; supplied with stainless steel machine screws. Contents: 1 handle set with installation screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plated diecast handles; outside handle with threaded studs and inside handle with holes; supplied with stainless steel machine screws. Contents: 1 handle set with installation screws.
|
Extruded aluminum bracket with glazing vinyl; 3/4" diameter oval edge nylon ball bearing roller; accepts up to 1/4" thick panels; used on frameless shower doors. Contents: 2 roller assemblies; 2 sets of installation screws.
|
Clear acrylic bottom guide for sliding tub enclosure doors. Fits on 1/2" thick panels. Used by Sterling and others.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prime-Line Shower Door Bottom Seal, Half Round, 36 in Length, 13/16 in Height, Vinyl, Gray
|
Prime-Line Shower Door Bottom Seal, 3/32 in Width, 37 in Length, 1 in Height, Vinyl, Clear
|
|
|
