|
|
|
|
|
|
|
|
|
|
|
Appearance grade, southern yellow pine. MCA treatment, above ground contact.
|
Single bevel cutting blades used in the "BAND-IT" edge trimmer. Cuts and trims flush, clean, and in both directions. .015" x .75" x 1.75". Carded.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
American Wood Common Board, 1 in Thickness, 4 in Width, 4 ft Length, Pine
|
Trims out panels and helps achieve a water resistant finished wall. For use with "Walltuf" liner panels.
|
Trims out panels and helps achieve a water resistant finished wall. For use with "Walltuf" liner panels.
|
|
|
|
|
|
|
|
|
|
|
|
|
Trims out panels and helps achieve a water resistant finished wall. For use with "Walltuf" liner panels.
|
Sanded on 4 sides.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
Trims out panels and helps achieve a water resistant finished wall. For use with "Walltuf" liner panels.
|
|
|
|
|
|
|
|
|
|
|
|
|
Appearance grade, white pine. MCA treatment, above ground contact.
|
Appearance grade, white pine. MCA treatment, above ground contact. Accommodates 4" x 4" post.
|
Appearance grade, white pine. MCA treatment, above ground contact.
|
|
|
|
|
|
|
|
|
|
|
|
|
Appearance grade, white pine. MCA treatment, above ground contact.
|
Appearance grade, white pine. MCA treatment, above ground contact.
|
Appearance grade, white pine. MCA treatment, above ground contact.
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
Sanded on 4 sides.
|
Used under Suntuf panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used under Palruf or Suntop panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
Sanded on 4 sides.
|
Woodtite 1" screw (sku 940.4302) with EPDM washer is used to fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a siding or cladding application and Woodtite 2" screw (sku 171.0235) also with EPDM washer is used to crown fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a roofing application.
|
|
|
|
|
|
|
|
|
|
|
|
|
American Wood Common Board, 1 in Thickness, 8 in Width, 4 ft Length, Pine
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
Appearance grade, white pine. MCA treatment, above ground contact.
|
|