|
|
|
|
|
|
|
|
|
|
|
|
|
|
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Manufactured according to ANSI/UL651. Furnished in standard 10' lengths with one bell end.
|
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Manufactured according to ANSI/UL651. Furnished in standard 10' lengths with one bell end.
|
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Manufactured according to ANSI/UL651. Furnished in standard 10' lengths with one bell end.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Manufactured according to ANSI/UL651. Furnished in standard 10' lengths with one bell end.
|
Designed for use with 90 degree Celsius conductors, the hand bendable conduit offers the safety of assured grounding. For 600 volt use in walls, floors and ceilings in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. UL Listed.
|
High grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating, and a clear organic polymer top-coat to form a triple layer of protection against corrosion and abrasion, has a low friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL Listed, meets ANSI C80.3.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Manufactured according to ANSI/UL651. Furnished in standard 10' lengths with one bell end.
|
Designed for use with 90 degree Celsius conductors, the hand bendable conduit offers the safety of assured grounding. For 600 volt use in walls, floors and ceilings in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. UL Listed.
|
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Manufactured according to ANSI/UL651. Furnished in standard 10' lengths with one bell end.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Manufactured according to ANSI/UL651. Furnished in standard 10' lengths with one bell end.
|
High grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating, and a clear organic polymer top-coat to form a triple layer of protection against corrosion and abrasion, has a low friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL Listed, meets ANSI C80.3.
|
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Manufactured according to ANSI/UL651. Furnished in standard 10' lengths with one bell end.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Manufactured according to ANSI/UL651. Furnished in standard 10' lengths with one bell end.
|
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Manufactured according to ANSI/UL651. Furnished in standard 10' lengths with one bell end.
|
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Manufactured according to ANSI/UL651. Furnished in standard 10' lengths with one bell end.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating, and a clear organic polymer top-coat to form a triple layer of protection against corrosion and abrasion, has a low friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL Listed, meets ANSI C80.3.
|
Contains everything necessary for complete installation including 6' conduit, two straight fittings and one 90 degree fitting. Totally non-metallic system provides assured grounding for safety. Non-conductive, non-corrosive. Easy to install. UL Listed components.
|
Resistant to rust, cracks, and separation. Constructed with two different PVC materials. 600 volt stranded copper THHN/THWN conductors and UL Listed LFNC-B fittings. Twelve-inch wire leads are left exposed at each end. Green insulated copper grounding conductor. Intended for 208/240/480 volt. UL / CSA, complies with NEC Article 356.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Manufactured according to ANSI/UL651. Furnished in standard 10' lengths with one bell end.
|
Contains everything necessary for complete installation including 6' conduit, two straight fittings and one 90 degree fitting. Totally non-metallic system provides assured grounding for safety. Non-conductive, non-corrosive. Easy to install. UL Listed components.
|
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Manufactured according to ANSI/UL651. Furnished in standard 10' lengths with one bell end.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Manufactured according to ANSI/UL651. Furnished in standard 10' lengths with one bell end.
|
Resistant to rust, cracks, and separation. Constructed with two different PVC materials. 600 volt stranded copper THHN/THWN conductors and UL Listed LFNC-B fittings. Twelve-inch wire leads are left exposed at each end. Green insulated copper grounding conductor. Intended for 208/240/480 volt. UL / CSA, complies with NEC Article 356.
|
High grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating, and a clear organic polymer top-coat to form a triple layer of protection against corrosion and abrasion, has a low friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL Listed, meets ANSI C80.3.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Manufactured according to ANSI/UL651. Furnished in standard 10' lengths with one bell end.
|
High-strength mild steel, impact and crush resistant, ductile for long life and easy bending. Provides radiation protection and magnetic shielding. Hot-dipped galvanized with a smooth baked on lacquer coating inside and out for high grade, durable pipe protection. With one coupling. 10 foot length. Listed to Safety Standard UL 6. Manufactured in accordance with ANSI C80.1.
|
High-strength mild steel, impact and crush resistant, ductile for long life and easy bending. Provides radiation protection and magnetic shielding. Hot-dipped galvanized with a smooth baked on lacquer coating inside and out for high grade, durable pipe protection. With one coupling. 10 foot length. Listed to Safety Standard UL 6. Manufactured in accordance with ANSI C80.1.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating, and a clear organic polymer top-coat to form a triple layer of protection against corrosion and abrasion, has a low friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL Listed, meets ANSI C80.3.
|
For the installation and protection of electrical conductors in circuits of 600 volts or less. Manufactured with a spiral of rigid PVC reinforcement imbedded within a flexible PVC wall. Impact and crush resistant, liquid tight and highly flexible. UV sunlight resistant jacket. Rated for temperature range of -30 to 80 degrees C , 60 degrees C Oil (-22 to +176, 140 degrees F Oil). UL Listed.
|
High grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating, and a clear organic polymer top-coat to form a triple layer of protection against corrosion and abrasion, has a low friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL Listed, meets ANSI C80.3.
|
|
|
