ELECTRICAL FITTINGS

Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL FITTINGS

Choose a sub category:

NON METALLIC CABLE CONNECTORS	BX / FLEX CONDUIT FITTINGS	EMT METAL CONDUIT FITTINGS
RIGID CONDUIT FITTINGS	LIQUID TIGHT CONDUIT FITTINGS	METAL CONDUIT ACCESSORIES
PVC CONDUIT FITTINGS	SERVICE ENTRANCE FITTINGS	GROUNDING RODS/CLAMPS
PLASTIC FLEXIBLE FITTINGS	CONDUIT STRAPS	WASHERS / REDUCERS
METAL CONDUIT SUPPORT

Sort By:

1 2 3 ... 19


Carlon E940D-CTN Standard Conduit Coupling, 1/2 in, SCH 40, Socket End, PVC Our Price: $0.26	Carlon E943D-CTN Terminal Adapter, 1/2 in Rigid/Non-Metallic, SCH 40/80, MNPT X Socket Our Price: $0.28	Halex 97521 Insulated Conduit Bushing, 1/2 in Rigid, Thermoplastic Our Price: $0.30

Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.	Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.	High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.


Carlon E940E-CTN/CAR Standard Conduit Coupling, 3/4 in, SCH 40, Socket End, PVC Our Price: $0.34	Carlon E942DR-CTN Conduit Adapter, 1/2 in Rigid/Non-Metallic, SCH 40/80, FNPT X Socket Our Price: $0.34	Carlon E942ER-CTN Conduit Adapter, 3/4 in Rigid/Non-Metallic, SCH 40/80, FNPT X Socket Our Price: $0.42

Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.	Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.	Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.


Carlon E940FR-CTN Standard Conduit Coupling, 1 in, SCH 40, Socket End, PVC Our Price: $0.46	Carlon E943E-CTN Terminal Adapter, 3/4 in Rigid/Non-Metallic, SCH 40/80, MNPT X Socket Our Price: $0.46	Halex 97522 Insulated Conduit Bushing, 3/4 in Rigid, Thermoplastic Our Price: $0.51

Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.	Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.	High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.


Carlon E943FR-CTN Terminal Adapter, 1 in Rigid/Non-Metallic, SCH 40/80, MNPT X Socket Our Price: $0.55	Halex 97525 Insulated Conduit Bushing, 1-1/2 in Rigid, Thermoplastic Our Price: $0.58	Carlon Snap Strap E978DC-CAR 1-Hole Single Conduit Strap, 1/2 in, PVC Our Price: $0.59

Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.	High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.	Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.


Carlon E996DR-CTN Conduit Box Adapter, 1/2 in Rigid, SCH 40/80, PVC Our Price: $0.60	Halex 96191 Rigid IMC Conduit Locknut, 1/2 in, Steel, Zinc Plated Our Price: $0.63	Carlon UA9ADB-CTN Standard Radius Rigid Conduit Elbow, 90 deg, 1/2 in, Belled End, PVC, SCH 40 Our Price: $0.63

For PVC enclosures. cULus Listed.	Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.	For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed.


Carlon E940GR-CTN Standard Conduit Coupling, 1-1/4 in, SCH 40, Socket End, PVC Our Price: $0.63	Halex 96163 2-Hole Snap-On Conduit Strap, 1 in, Steel Our Price: $0.63	Halex 90440 Screw-In Connector, 3/8 in EMT, Flexible, Die Cast Zinc Our Price: $0.64

Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.	To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.	Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs.


Carlon Snap Strap E978EC-CAR 1-Hole Single Conduit Strap, 3/4 in, PVC Our Price: $0.64	Carlon E942FR-CTN Conduit Adapter, 1 in Rigid/Non-Metallic, SCH 40/80, FNPT X Socket Our Price: $0.66	Carlon E996ER-CTN Conduit Box Adapter, 3/4 in Rigid, SCH 40/80, PVC Our Price: $0.67

Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.	Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.	For PVC enclosures. cULus Listed.


Halex 96821 Rigid Reducing Conduit Washer, 1/2 in x 3/4 in, Steel Our Price: $0.68	Halex 97523 Insulated Conduit Bushing, 1 in Rigid, Thermoplastic Our Price: $0.71	Halex 96831 Rigid Reducing Conduit Washer, 1/2 in x 1 in, Steel, Galvanized Our Price: $0.71

Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved.	High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.	Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved.


Halex 96832 Rigid Reducing Conduit Washer, 3/4 in x 1 in, Steel, Galvanized Our Price: $0.71	Carlon UA9ADR-CTN Standard Radius Conduit Elbow, 90 deg, 1/2 in Rigid, Plain, SCH 40, PVC Our Price: $0.72	Carlon E940HR-CTN Standard Conduit Coupling, 1-1/2 in, SCH 40, Socket End, PVC Our Price: $0.73

Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved.	For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.	Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.


Carlon E943GR-CTN Terminal Adapter, 1-1/4 in Rigid/Non-Metallic, SCH 40/80, MNPT X Socket Our Price: $0.74	Carlon UA7ADB-CTN Standard Radius Conduit Elbow, 45 deg, 1/2 in Rigid, Bell, SCH 40, PVC Our Price: $0.74	Carlon A240D-CAR 1-Piece Conduit Coupling, 1/2 in ENT, PVC Our Price: $0.76

Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.	For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.	Quick connect, fold and snap together. No cement, set screws or lock nuts. For 600 volt use in ceilings, floors and walls in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. Concrete tight when used with Carlon ENT. UL Listed.


	1 2 3 ... 19