|
|
|
|
|
|
|
|
|
|
|
|
|
|
For home, auto and marine applications.
|
For home and auto applications.
|
For home, auto and marine applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For home, auto and marine applications.
|
Copper clad insulated battery clamp. Color-coded jacketed handles, 1 black and 1 red. Less than 5" long.
|
For battery, battery charger and testing equipment applications. Copper clad clamps. Handle grips are insulated and color-coded for positive (red) and negative (black) identification.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Test for presence of voltage in live circuits. Tests AC/DC voltage from 80-250 volts. The neon indicator glows when voltage is present and brightens as voltage increases. Insulated housing and 2 inch test leads. Built in pocket clip. Tests DC motors, switches and outlets. With detailed user instructions.
|
Replacement leads for Gardner Bender meters GMT-12A, GMT-18A. UL recognized. Tough ABS Plastic. Flexible cords for easy use.
|
Tests AC/DC voltage from 5-50 volt. Glows when voltage is present and brightens as voltage increases. Insulated alligator clip tests leads. UL Listed. Carded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For testing electric circuits from 90 to 600 volt. Detects presence of power on either AC or DC circuits. Identifies circuit conductors.
|
Cuts and strip wires, crimps ignition terminals. Easy-to-read wire size markings.
|
Sperry Voltage Tester, Single Range, 80 - 250 VAC/VDC, Yes, 32 - 104 deg F, ABS, cULus, CE Certified, 6 in Lead, For Indoor Applications
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Helps to align multigang installations of 2 gangs or more. Wall plate fits without additional adjustment. Adjusts to any combination of toggle, decorator and duplex. Built-in bulb level.
|
Strips UTP and STP cable up to .24" (6.2mm) OD. Tension release lever, compact design. For use on CAT 3 and CAT 5 cable. Carded.
|
GB Cable Ripper, Premium, 14 - 6 AWG Cable/Wire, 4 in Overall Length, cULus Listed, For Use to Cut Off Cable Jacket
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tests standard receptacles and extension cords to ensure proper wiring. Neon indicators give positive indication of circuit status. Compact unit simply plugs into any standard 3-wire/grounded receptacle or extension cord (110 /125 volt circuits). Tests for six circuit conditions: open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring. Yellow and red lights provides indication of circuit status or specifies wiring errors.
|
Includes spring return and lock. Adjustable, hardened spring steel. Strips 10-24 gauge wire.
|
Large, dual, neon indicators acknowledge presence of voltage. Individual indicators for each voltage range assures reliability of testing. Probes snap on bottom of housing for single hand testing of outlets. Insulated leads and housing. Tests from 100 to 300 volt AC/DC. UL Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Three-way live circuit tester indicates 120, 240 and 277 volt AC. UL Listed.
|
Tests for breaks in non-energized wires or cords. 360 degree visual indication. Durable, heavy-duty tip. Flexible lead with insulated alligator clip. Pocket clip. Operates from 2 AAA batteries (included).
|
Economy continuity tester, tests continuity in nonenergized circuits. Features 36" insulated lead with alligator clip end. Fully shielded indicator bulb lights to indicate continuity, Uses 2 AA batteries, not included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy cream-like paste. Slides on smoothly and clings throughout the pull. Excellent abrasion protection and cling ability, repels water to some extent. Modified wax base formula dries to a slippery film. Greaseless, non-toxic, will not stain skin, clothing or construction trim; cleans up with soap and hot water. Withstands normal temperature extremes and will not dry out in the container. Remains stable with 3 freeze-thaw cycles. Non-combustible, non-conductive and non-corrosive. Will not damage conduit or insulation. Suitable for fiber-optic wire. Yellow color. In a squeeze bottle. UL Listed.
|
Tapered nose allows cutting in tight locations. Dual cutting edge and high-leverage comfort grip handle design for optimal cutting performance. Precision-machined and induction-hardened knives strengthen cutters and provide consistent performance when cutting aluminum, copper and medium-hard steel wire.
|
Smart bulb changers attach to an extension pole and allow the user to remove and replace bulbs quickly and easily, while standing safely on the ground. Suction cups hold bulbs for easy changing. Quick release design breaks the suction on the bulb quickly and easily. Standard 3/4" acme threads to fit most extension poles, pole not included. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tests ground fault breakers by overloading circuit and tripping GFCI. Plug tester into any ground fault receptacle (110-125 volt AC) and press black button to overload circuit. Tests for seven conditions; ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring. Yellow and red lights provide indication of circuit status or specify which wire is defective. Carded.
|
Heavy-duty tool for safely removing cartridge fuses from their blocks.
|
Strips cable, 10-22 AWG wire, crimps terminals and cuts bolts. Easy-to-read wire size markings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rust-resistant steel with cushioned vinyl grip. Easy-to-read wire size markings.
|
Multi-function long nose pliers cut, strip and crimp. Use needle nose to form wire or grip small parts. Strips number 14 - number 16 AWG solid or stranded wire. Crimps insulated terminals up to number 10 AWG. Cuts solid or stranded wire. Serrated jaw and cushioned grips.
|
Smart bulb changers attach to an extension pole and allow the user to remove and replace bulbs quickly and easily, while standing safely on the ground. Suction cups hold bulbs for easy changing. Quick release design breaks the suction on the bulb quickly and easily. Standard 3/4" acme threads to fit most extension poles, pole not included. Made in the USA.
|
|
|
