|
|
|
|
|
|
|
|
|
|
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 315 PSI rating at 73 degrees Fahrenheit.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
|
|
|
|
|
|
|
|
|
|
|
|
|
High-temperature domestic water supply used in hot and cold water pressure applications, from water main to fixtures. For hot water distribution systems up to 180 degrees Fahrenheit at 100 PSI. Sizing equals copper pipe size.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
|
Highly resistant to corrosion and energy efficient. Offers reduced condensation, quiet operation, and no scale build-up. Meets ANSI/NSF 61 requirements regardless of the pH of the water.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
|
Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665).
|
Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
|
Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
|
|
|
|
|
|
|
|
|
|
|
|
|
High-temperature domestic water supply used in hot and cold water pressure applications, from water main to fixtures. For hot water distribution systems up to 180 degrees Fahrenheit at 100 PSI. Sizing equals copper pipe size.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
|
Exceeds ASTM standards and is made with no-break copolymers for professional grade strength and integrity, Proprietary peak and valley design offers greater surface area and a 30 percent higher load-bearing rating than standard corrugated pipe, Perforated pipe with sock is ideal for French drain application in fine soil, Fittings available to adapt to 3 or 4 in. corrugated pipe and 4 in. PVC, Perfect for tight spaces and curvy places, Taping joints is not necessary. This pipe has spaced slits, so water drains in stages. It's also perfect for applications such as French drains or dispersing water from flower beds, but works even better in locations where surrounding soil or sand is fine and requires filtration or where debris is considerable.
|
|
|
|
|
|
|
|
|
|
|
|
|
Great for diverting water from one place to another, Water will not seep out until it reaches the end of the pipe.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size.
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
|
|
|
|
|
|
|
|
|
|
|
|
|
Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665).
|
Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases.
|
Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665).
|
|
|
|
|
|
|
|
|
|
|
|
|
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
|
Highly resistant to corrosion and energy efficient. Offers reduced condensation, quiet operation, and no scale build-up. Meets ANSI/NSF 61 requirements regardless of the pH of the water.
|
Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
|
|