|
|
|
|
|
|
|
|
|
|
|
|
|
|
Small screw-in insulator.
|
Model clips hold electric fence wire and polytape (up to 2" wide). Molded of reinforced polypropylene with a heavy-duty steel stake. Extra reinforcing ribs for strength. Features large step-in flange and anti-rotation spike to keep stake from turning. Includes 8 wire holders.
|
Heavy duty fence post keeps your property protected. Molded clips to hold electric fence wire and poly tape (up to 2" wide. Each 4' post molded from reinforced polypropylene with a heavy-duty steel stake.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connects 1/2'' polytape to the end insulators to reach all of your fence posts.
|
For splicing polytape up to 1/2" wide. Allows for fast, secure joining of polytape rolls. Connects one polytape to another without losing juice.
|
Molded of tough, high quality plastic with shockproof thickness for safe handling protection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Large screw-in insulator.
|
Connects 1" polytape to the end insulators to reach all of your fence posts.
|
Allows you to connect one polyrope to another to reach all of your fence posts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For firmly securing an electrified wire to corner posts without losing energy through the post. Formed of thick, tough plastic. Can withstand the strain of wire at corner of electrified fence. For 9-22 gauge high-tensile steel wire and aluminum wire, all polywire (regular and heavy duty), and polyrope up to 1/4" in diameter. Can use on chain link fence.
|
For a secure connection between ground wire and ground rod. Heavy duty construction. Made of aluminum; will not rust. For use with 5/8" and larger ground rods. 1 clamp per pack.
|
Super tough fiberglass reinforced electric fence post. Unique step-in design with adjustable insulators that can be used with Baygard wire, Bayshock wire or Baygard HV tape. Designed for improved strength. Complete with 4 versatile insulators that can accept wire, tape and rope. Weather resistant. Non conductive and lightweight.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to wrap MG spacer clips No.400-430T to wire while securing poly spacer posts No.200-260. Also used for twisting 12.5, 11 and 9-gauge wire.
|
Made of virgin, high impact polyethylene. Designed for quick, easy installation. For use with heavy gauge wire and barbed wire.
|
Self-drilling, screw-in electric fence insulator that can be used with any type of wire, including high tensile. Made of sturdy plastic. Easy to install.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connects 1/2" polytape to another without losing power so you can reach distant electric fence posts. Use at the ends of polytape for dead-ending or gate handle connections.
|
For splicing together 1/4" polyrope. Allows for fast, secure joining of polyrope. Can also be used to make electrical connections between fence lines and the fence charger.
|
Ridged design enables the staple to lock without penetrating insulator profile. Made of non-conductive polyethylene.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use with fence wire and polyrope. Insulates against shock.
|
Standard, snug fitting T-post insulator. For fastening electrified wire to the post without losing energy through the post. Fits securely on standard (1.25 or 1.33) studded T-posts. One molded piece; needs no hardware. Yellow. Bag of 25.
|
Anchoring gate handles. This insulated anchor is to be used in conjunction with the gate handle. The screw-in design type is for wood gate posts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For connecting a fence charger to polytape. This clamp connects the fence charger connects the fence charger to polytape anywhere in the fence line where an electrical connector plate is inaccessible. Connects the polytape to the energizer.
|
125 to 145 Breaking Load Limit.
|
Connects 2" polytape to the end insulators to reach all of your fence posts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to tighten high-tensile wire. Under compression, it automatically feeds into cog reel.
|
For poly tape (up to 2") electric fence wire. Wood post insulator that can be used at corners, ends or t-junctions.
|
Standard, snug fitting T-post insulator. For fastening electrified wire to the post without losing energy through the post. Fits securely on standard (1.25 or 1.33) studded T-posts. One molded piece; needs no hardware. Yellow. Bag of 25.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used with 6" x 8' posts in each single or double brace assembly. Made of 3/8" carbon steel rods and galvanized.
|
For anchoring gate handles. This insulated anchor is to be used in conjunction with the fence gate handle. The screw-in design is for T-post gate posts.
|
Black letters on a yellow polypropylene background. Two holes for fastening to fence wire or nailing to wood post. 3 signs. "Warning! Electric Fence" printed in English, French and Spanish languages.
|
|
|
