Home > AUTOMOTIVE > GENERAL AUTOMOTIVE > LUBRICANTS & FLUIDS
Choose a sub category:
A/C COOLANT STARTER FLUID MOTOR OIL
MOTOR OIL ADDITIVES GEAR OILS TRANSMISSION FLUIDS
HYDRAULIC OIL OIL/FLUID CLEAN-UP GREASE
GREASE FITTINGS GREASE GUNS/ACCESSORIES DEGREASERS
OIL CANS BRAKE FLUIDS POWER STEERING FLUIDS
FUEL ADDITIVES WINDSHIELD FLUIDS/TREATMENTS ICE REMOVAL
SPECIALTY LUBRICANTS FUNNELS/MEASURES DRIP PANS / DRAIN PANS
Sort By:
1 2 3 ... 14
STP 78572 All Season Water Remover STP 00203 Brake Fluid Solder Seal Gunk M516 Anti-Freeze Windshield Washer Fluid
Provide year-round corrosion and rust prevention. Removes water without alcohol and helps keep fuel injectors clean. Use with every fill up especially during winter and in warm, wet weather. Treats up to 79 litres. Formulated for optimum performance for all disc or drum brake systems requiring DOT 3 fluids. Provides protection against brake failure from vapor lock, helps prevent corrosion. Complies with Federal Motor Vehicle Safety Standard No. 116. Meets SAE spec. J1703. Concentrated formula designed to protect windshield washer systems from damage caused by temperatures as low as 25 degrees Fahrenheit. Superior for all season use when diluted as directed. See bottle for minimum delution requirements in California, Texas and Georgia. Makes 8 gallons.
Heel 28201 Gas Line Anti-Freeze STP 78571 Fuel Injector and Carburetor Treatment Hopkins 5034 Super Funnel
Additives and methanol formula safe for use in all 4-cycle engines. Prevents gas-line freeze-up, rust and corrosion year round. Removes water from fuel system, absorbs moisture in carburetor. Improves engine performance for year-round quick starts. Safe on catalytic converters and fuel injectors. 1 bottle treats up to 10 gallons. Helps save gas and improves performance by keeping fuel injectors and carburetors clean of harmful deposits. Helps prevent power loss, reduce engine friction and maintain optimum engine efficiency. Use regularly with fill up. Treats up to 79 litres. May be used with multiple substances such as oil, radiator fluid or fuel additives. 1-piece tapered, tough, high-density polyethylene for hard-to-reach spots.
Bell V500 Lock Lubricant Thaw De-Icer Honeywell AS-400P Brake Fluid Coastal 701169/21143 Iso Dry Gasoline Anti-Freeze
Thaws frozen locks of auto doors and trucks, as well as any outdoor and household lock, then prevents locks from refreezing and rusting. Aerosol, carded. High boiling point gives an extra margin of safety and is designed for safe operation of high-powered vehicles. For ABS, disc, and drum brake systems. DOT 3, meets or exceeds Federal Motor Vehicle Safety Standard 116 and SAE Spec. J1703. 284 degrees Fahrenheit min wet boiling point. Allows for quicker starts, helps prevent frozen gas lines and absorbs water. Can be used year round in 4-cycle gasoline engines. It will not harm catalytic converters, oxygen sensors or fuel injectors.
STP 78573 Gas Treatment 3-in-One 10035 Oil Permatex 80345 Grease
Improves the quality of gas and keeps fuel injectors and intake valves clean. Helps fight the accumulation of harmful carbon, gum and varnish deposits in the fuel system and remove water. Made with jet fuel, a high-quality carrier of active ingredients. Treats up to 21 gallons of gasoline. Use with every tankfull. Blend of 3 oils that lubricate, clean, protect, and prevent rust. Use on locks, sliding doors, hinges, sewing machines, fans, window tracks, in saw blade cutting, on scissors, drawers, sports and recreation equipment and on the job for small motors. Fine quality for home, auto, and shop applications. Use on all metal parts. Clean and easy to use for thorough lubrication and long-lasting protection. Stops rust and corrosion, prevents wear. For tools, latches, hinges, reels, gears, wheels, etc. Long, tapered nozzle on tube permits pinpoint accuracy in applying grease. On a card.
Rain-X 800002242/RX11112 Original Glass Treatment Liquid Wrench Super Oil L1004 Household Lubricant Solder Seal Gunk M2713 Power Steering Fluid with Stop Leak
Dramatically improves wet weather driving visibility, with and without wipers. Repels rain, sleet, and snow, frost, salt, mud, bugs and grime. A light grade non-detergent machine oil that lubricates and protects metal parts against wear, tarnish, rust and corrosion, the premium household oil, convenient dropper bottle. Stops leaks, revitalizes old seals, prevents wear, foam and oxidation. In a plastic bottle.
STP 66046 Power Steering and Stop Leak Blaster PB50 Lubricant 3-in-One 10045 Motor Oil
Formulated to stop or reduce fluid loss caused by seals which leak due to wear or shrinkage (not for use with broken or scored seals). One treatment helps stop most wear and shrinkage. Can be used instead of regular power steering fluid as preventive maintenance. Compatible with all approved power steering fluids. Helps protect against wear and pump breakdown. High-performance formula designed to lubricate moving parts in and around the house such as window tracks, hinges, valves, wheels, rollers, chains, glides and gears. Displaces moisture, prevents rust and further corrosion. Use on all moving parts. Light vanilla scent. Aerosol can. Special blend of high-grade oils equivalent to SAE-20. For electric motors of 1/4 HP or larger, and for outdoor use on guns, fishing tackle, lawn mowers, bicycles, farm, garden and workshop equipment. Non-sliding, will not run off, helps prevent rust and tarnish.
WD-40 490002 Lubricant Gumout 800001370 Gas Treatment STP 66079/ST-1014 Performance Oil Treatment
Displaces moisture, non-conductor that can be used to dryout electrical and electronic equipment. Penetrates, loosens and frees stuck, frozen or rusted parts. Lubricates and protects metal against moisture and corrosive elements. Removes grease, grime, tar, gum, crayon, water deposits and more. Dissolves adhesives for easy removal. Silicone-free for no messy, gummy residue. Travel size spray can. Helps to prevent deposit build up, fight rust and corrosion and remove water to help reduce gas line freeze. Use with up to 21 gallons of gasoline every fill up. Provides a thick cushion between moving engine parts to fight friction and protect against engine wear. Use every oil change. Treats 4-5 litres of oil.
Hopkins 5068 Funnel Set Radiator Specialty M2312 Gas Treatment Solder Seal Gunk DE1 Windshield De-Icer
Made of tough, high-density polyethylene for dispensing petroleum-based fluids. May be used with substances such as oil, radiator fluid or fuel additives. Includes one each: gray 1/2-pint, charcoal 1-pint, and black 2-quart. Helps clean entire fuel system, reduces intake valve deposits, increases fuel economy, removes water, fight gas line freeze. 1 plastic bottle treats 1 tank, use in every tank for maintenance. Defrosts car windows instantly. Helps free frozen locks. Spray in advance to help prevent frost formation.
FUNNEL ASSORTMENT BLK 3PK Tri-Flow 21010TF Penetrating Lubricant Lubrimatic 05-028 Standard Jaw Hydraulic Grease Gun Coupler
Tough, high density black polypropylene, will not rust, dent or crack. Stabilizing handle allows smooth, steady pouring. Penetrates quickly, displaces moisture, reduces friction and wear on moving parts, protects against rust and corrosion. Reduces buildup of dirt, dust, and abrasive particles. Loosens rusted parts, frees sticky mechanisms. Contains high-grade petroleum oils, micronized Teflon, and other ingredients to soften and remove dirt and corrosion, and keep equipment operating at its peak under heavy load, high wear, and severe temperature extremes. Use on bearings, rollers, drive chains, gears, locks, winches, shafts, sprocket housings, cables, tolls, conveyors, bolts, hinges, and cranks. Brown with a mild, fruity odor. Non-staining, safe on metal, wood, plastic, and rubber.  Squeeze bottle. For hand-operated lube equipment only. 4,500 PSI recommended working pressure. Features spring-loaded ball check valve. Fits all 1/8" NPT threads.
STP 78575 Super Fuel Injector Cleaner Radiator Specialty M4912 Fuel Injector Cleaner Permatex 81343 Anti-Seize Lubricant
Unclogs dirty fuel injectors to restore performance and acceleration. Helps dissolve and remove harmful carbon, gum and varnish deposits on fuel injectors. Helps smooth rough idle and eliminate tough starts. Treats up to 21 gallons/79 litres of gasoline. Add to gas every 6,000km or every oil change. Keeps fuel injectors and carburetors clean, restores lost power, reduces exhaust emissions. In a plastic bottle. A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing and to assure easier disassembly. Temperature range: -60 to 1,600 degrees Fahrenheit. Salt, corrosion and moisture resistant for marine use. For easy removal of spark plugs, cylinder head and exhaust head bolts. Meets Mil Spec #907E, Level 3 NFPA Fire Code. Tube, carded.
   
 
1 2 3 ... 14