|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
|
Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
|
Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
|
National Hardware Lap Link, Series: 3152BC, 1/8 in, Steel, Zinc Plated, 120 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain
|
Campbell Welded Ring, 1 in Length X 0.18 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Lap Link, Series: 3152BC, 3/16 in, Steel, Zinc Plated, 225 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain
|
Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
|
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2. WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel.
|
|
For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
|
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2. WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting.
|
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Campbell Welded Ring, NO 7 Chain, 1-1/4 in Length X 0.18 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity
|
National Hardware Cold Shut, Series: 3153BC, 1/4 in, 0.24 in Rod Diameter, 0.26 in Hole Diameter, Steel, Zinc Plated, 1250 lb Load Capacity, 1.61 in Width, For Use to Couple Chain Attachments
|
National Hardware Lap Link, Series: 3152BC, 1/4 in, Steel, Zinc Plated, 500 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
.
|
National Hardware Ring, Series: 3155BC, NO 7 X 1 in, Steel, Zinc Plated, 195 lb Load Capacity, For Rope, Chain and Strap
|
WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Ring, Series: 3155BC, NO 4 X 1-1/4 in, Steel, Zinc Plated, 270 lb Load Capacity, For Rope, Chain and Strap
|
National Hardware Ring, Series: 3155BC, NO 3 X 1-1/2 in, Steel, Zinc Plated, 300 lb Load Capacity, For Rope, Chain and Strap
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Cold Shut, Series: 3153BC, 5/16 in, 0.32 in Rod Diameter, 0.35 in Hole Diameter, Steel, Zinc Plated, 1900 lb Load Capacity, 1.94 in Width, For Use to Couple Chain Attachments
|
Forged fasteners for numerous farm and other applications. 3 pins. Black powder coat finish.
|
National Hardware Ring, Series: 3155BC, NO 7 X 1 in, Steel, Brass, 195 lb Load Capacity, For Rope, Chain and Strap
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Campbell Welded Ring, NO 3 Chain, 2 in Length X 0.24 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity
|
Campbell Welded Ring, NO 4 Chain, 1-1/4 in Length X 0.22 in Wire Size, Steel, Zinc Plated, 200 lb Load Capacity
|
Numerous farm, lawn, and garden and industrial applications.
|
|
|
